Installation
In-ground Posts
Neata is a very high quality stainless steel queue management system that locks into the floor.It is tamper resistant but still can be easily removed or relocated when required. The Neata queue management system has a footprint of only 65mm. When the posts are removed they leave a safe and neat flush-capped floor.
Posts are available in three styles and weigh a mere 3.2kgs.
 |
|
 |
 |
|||||||||
| |
||||||||||||
| Step 1: A 25mm diameter hole is core drilled 85mm deep into the floor to accommodate the in-ground sleeve. The sleeve is secured in place, flush with the floor surface. |
Step 2: The post is screwed into the in-ground sleeve by hand until tight (approximately 4-5 turns). For permanent deployment, use the optional locking tool to secure the post and avoid tampering. (No need to over-tighten). | Step 3: Once locked in place, the post can be rotated left or right through 310° by hand, or by using the locking tool, to achieve perfect belt alignment with other posts in the system. |
Positioning the Posts
Posts can be removed easily at any time, and because they always go back in the same location, they are always in perfect alignment. This eliminates the need for constant adjustment or tidying up. Your queue system always looks great and set up time is minimised.
Impact Absorption Feature
Neata posts are able to tilt by up to 10°, allowing them to take any number of knocks. This is due to the in-built impact absorption feature - a world first design! This keeps your customers and their property safe and keeps your posts looking great! The image (right) shows the movement that is possible with the impact absorption feature.
